|
||||||||||||||||||||
 |
 |
 |
||||||||||||||||||
|
CNT-Scan MM The CNT-Scan MiniModule is a high-precision measurement module for frequencies up to 300 kHz, for measurement of duty cycles / PWM signals, measurement of cycle / pulse duration as well as event counting. Speed is captured directly in the module and displayed as value on the CAN bus. Furthermore the time offset between adjacent channels can be measured. The inputs are completely electrically isolated and connected sensors can be powered directly from the module. Each measurement mode needs only one signal input. Individually triggering on signal levels for On and Off is supported. The On- / Off-Trigger thresholds are separately adjustable for each channel. A switchable AC coupling allows to suppress an undesired DC offset of the input signal. The user does not have to think over which measuring procedures should be used. High as well as low frequencies are automatically captured with constant high accuracy. This applies also to short and long periods and pulses. |
|
|||||||||||||||||||
|
||||||||||||||||||||
tke.fi |