filler filler     filler  
 

Göpel PXI 3058
[Can-Hardware-Interfaces-PXI-Göpel PXI 3058]

PXI 3058 has been developed to provide CAN interfaces for the interchange of messages in a CAN network. The CAN board's goal is that each CAN interface has its own micro controller. Therefore, it is possible to generate real timings at CAN messages. The card is built modularly and realizes two to four CAN interfaces. To ensure a high flexibility, the transceivers on the board are arranged as SIMM modules. For high speed transceivers there is a terminating resistor of 120 Ohm on the board, which can easily be switched to the CAN signals via a jumper at every time.

Highlights:

  • Up to four independent full-CAN controllers
  • CAN protocol conforms to CAN specification 2.0B
  • "intelligent" CAN interface with 32 Bit µ controller
  • Freely configurable transceiver according to CAN interface (high or low speed)
  • Send cyclical CAN messages (cyclical time declaration as the multiple of a millisecond)

Fields of Application:

  • CAN applications in the automotive industry
  • CAN applications in the process control
  • General test and measurement systems
 Göpel 3058  
     
         
infotke.fi | Phone: +358 6 357 6300 | Fax: +358 6 357 6320
 
contact info home index